HomeClearview FencingHigh Security
Clearview • High Security

High-Security Clearview Fencing (358)

The true 358 panel - a 76 × 12mm aperture that's effectively finger-proof, virtually impossible to climb and extremely difficult to cut. Maximum perimeter protection for properties where security comes first.

Aperture 76 × 12mm Wire 3mm / 4mm Rigidity 4 V-bends Heights up to 2.4m
High-security Clearview 358 fence with 76x12mm anti-climb mesh, installed by Bay Barrier 76 × 12mm • 358 mesh

Why it's high security

The tighter the mesh, the harder the target

High-security Clearview is what the industry calls a 358 panel, named after its 3" × 0.5" aperture (76 × 12mm). That single dimension is what does the work - and it's reinforced with four V-bends for rigidity and topped with thick vertical wire that defeats hand tools.

Finger-proof, no foothold

The 12mm-narrow gaps are too tight to grip or stand on, so there's nothing to climb - unlike palisade or rail fencing.

Anti-cut wire

3mm horizontal and 4mm vertical galvanized wire, densely spaced, resists bolt cutters and standard hand tools.

Rigid & stable

Four 50mm-deep V-bends stiffen the panel, so it stays taut and stable - ideal for electric strands and alarms.

Specifications

High-security Clearview panel

The standard high-security build we supply and install. Exact post, topping and foundation detail is confirmed per site during your on-site consultation.

Fence rangeHigh-security Clearview (358), horizontal or vertical
Aperture76 × 12mm (3" × 0.5" - the "358")
Wire diameter3mm horizontal × 4mm vertical (galvanized)
Rigidity4 V-bends (reinforced, 50mm-deep V-formation)
Panel size3000mm wide; heights 1.2m | 1.8m | 2.1m | 2.4m
Tensile strengthApprox. 624-626 MPa average
PostsT-post 100 × 60mm or 76 × 40mm, or SQ post 76 × 76mm, with UV-resistant caps
FixingsFT clamps with tek screws (up to 16 per panel)
Topping (optional)Anti-climb spike (1500mm × 85mm) with anti-tamper shear-off bolts; electric strands
CoatingsGalvanized • polyester powder-coated • Plascoat/PVC (min 600 microns, coastal)
Foundations400 × 400mm concrete (confirmed per site)

Where it's used

Built for high-risk perimeters

When the priority is keeping people out, high-security Clearview is the specification to reach for across the Garden Route.

Complete the perimeter

Add an energised top and automated access

Other security levels

Not sure you need maximum security?

High security is the tightest mesh. If you want a balance of protection and price, or mainly clean demarcation, the medium and low options may suit better.

Questions

High-security Clearview FAQs

What makes Clearview high security?

The 76 × 12mm aperture. It's small enough to be effectively finger-proof, so there's no foothold to climb, and the dense, thick wire is extremely difficult to cut with hand tools. This is the true 358 specification.

How high can it go?

Standard heights are 1.2m, 1.8m, 2.1m and 2.4m. Panels can be topped with anti-climb spikes and electric strands for extra height and deterrence.

Is it suitable for the coast?

Yes - specified with the Plascoat/PVC coating (minimum 600 microns over galvanized steel), it stands up to Garden Route salt air far better than plain galvanized.

Can you supply only, or install too?

Both. We supply high-security panels, posts, clamps and spikes for your own project, or handle the full supply-and-install with electric and gate add-ons.

Free • No obligation

Get a high-security Clearview consultation

Contact us - we'll assess your perimeter anywhere in the Garden Route and advise on spec, height and coating, at no charge.